Model iBeLink BM-K1+ from iBeLink mining Kadena algorithm with a maximum hashrate of 15Th/s for a power consumption of 2250W
iBeLink BM-K1+ is the Kadena miner set to compete with the Goldshell KD5. The BM-K1+ model, also known as the BM-K1 PLUS, comes with a hashrate of 15 TH/s. It uses the Kadena algorithm but, you can also integrate the Blake (2s-Kadena) algorithm. The iBeLink BM K1+ comes with a maximum power consumption of 2250W. Learn more about it in our detailed IBELINK BM-K1+ REVIEW.
At first glance, you will immediately notice the sleek design of the miner. The top is slightly different from the other iBeLink miners. You can only mine Kadena with this miner. So far, there are no mining pools available for this miner.
With the release date set for late 2021, the miner comes at a perfect time where Kadena is profitable. The competitor is currently the best miner.
Both of these miners rank number one and two in terms of profitability, respectively.
You can mine a total of 11 coins with the miner. It’s a significant improvement from the previous version, the K1 Blake 2s Miner. Some of the top coins to mine include Kadena, XVG, NH Blake, and more.
For those interested in the miner, you have to pre-order it.
The distribution of the miner is slated to begin in November 2021. With it competing for the first spot as we close the year, it makes it a perfect investment opportunity.
With the Kadena algorithm, you get a scalable MFT that uses a consensus. And this is what makes the algorithm unique from others. So even though the algorithm isn’t that secure as the SHA-256 algorithm, it makes the cut.
Even with a few flaws here and there, the Kadena algorithm will still deliver.
As long as Kadena is a profitable coin, miners will significantly benefit from it. In addition, the algorithm is fast and secure, protecting miners from the 51 percent attack.
You get a miner with an efficiency of 0.15j/Gh. The efficiency is lower than the predecessor.
And this means it will cut energy consumption. Of course, it will take longer to mine, but the efficiency will still give you the results you need.
Miners get the power they need to mine Kadena effectively.
Although miners prefer high power, the efficiency is sufficient to mine 11 coins. Therefore, the number of coins you get from this efficiency is just the right amount.
15 TH/s is the efficiency you get from the K1 Plus miner. It’s three TH/s less than the K1 model. Today’s market shows that this hashrate will probably give you $290 in profitability. And this makes it a perfect hash rate.
You get the same amount of power, 2250W, as that of the predecessor.
And this means mining 11 coins with the same power and results. So it goes to show the manufacturer went for efficiency and results at the same time.
To ensure the miner mines are under acceptable conditions, you need to use them in a conducive environment. The proper humidity and temperature mean you will have the miner for longer. So it’s only fitting to have a long-lasting miner.
IBeLink BM-K1+ comes with a noise capacity of 74 decibels. You can use this miner at home or even in an office setup. For those looking to use the miner for large-scale mining, the noise won’t be a problem.
On the release date, the miner had a daily profitability reading of $290. Depending on your electricity rates, the cost stands at $6 daily. If this pattern continues, the miner projects to make a net profit of $94,000 in a year.
Disclaimer: The Above Profit Table is a carefully calculated estimate based on known real-time factors and Parameters. The actual values may or may not vary significantly from the values provided in the table above. The Above table is only meant to provide insights and afford Ideas to any cryptocurrency miner looking to purchase this particular Product for Mining Purposes.
|Size||128 x 201 x 402mm|
|Temperature||5 °C – 45 °C|
|Humidity||5 % – 95 %|